SunSun SuperEco JTP Series, Operation Manual

Page: 6 / 8

Parts list and operating instructions
JTP-1800-2800-3800-4800
No. Designation No. Designation
1 Control valve 6 Bearing
2 Filter casing 7 Housing
3 Impeller cover 8 Rear cover
4 Rotor 9 Cable seal
5 O-sealing ring 10 Base plate

Fig. 1: Set the flow rate using the rotary control.

Fig. 2: Open the filter housing by turning it in the direction of the arrow and then pulling it off.

Fig. 3: Move the snap lock on the base plate in the direction of the arrow.

Fig. 4: Remove the base plate.

Fig. 5: Turn the motor housing in the direction of the arrow and remove it.

Fig. 6: Pull the impeller and pump shaft out of the housing to clean or replace them.

Fig. 7: Make sure that the sealing ring is properly refitted before reassembling the pump.
© by WilTec Wildanger Technik GmbH Item 51634-51645 Page 6
http://www.WilTec.de
http://www.aoyue.eu 05 2021 -1
http://www.teichtip.de