Warnings
Attention: please make sure that all pump parts are intact before switching on the wave
maker. Do not connect it to voltage supply sources whose voltage do not match the one indic-
ated on the device.
There must be no sand in the pump, otherwise component parts are destroyed. Pump dam-
age caused by sand is not covered by warranty.
Due to the strong magnetism it must be stored out of reach of children.
Place the magnets on the two sides of the aquarium wall. Avoid putting your hands or fingers
between them as this can cause injury.
If the distance between the magnets and other metal parts or other magnets is only 5 cm, the
magnetism between them is very strong. To avoid injuries please keep a sufficient distance of
the pump magnets from narrow edges, sharp items and other magnets.
These magnets can cause permanent damage to electrical equipment or other devices for ex-
ample: pace makers, credit cards, keys. For this reason keep a 30 cm distance.
To avoid damaging the aquarium, please proceed when positioning the magnets as follows:
Do NOT move the magnets from both glass sides perpendicularly towards each other (Never
put the external and internal magnet directly together) but place them shifted from one another
and slide them across the glass till they join up.
Features
1.
Three operation modes: wave mode, random mode and constant flow mode.
2.
Low energy consumption
3.
Low-voltage direct current pumpe (AC100~240V 50/60Hz)
4.
Intelligent, easy to use control system
5.
Suitable for fresh and salt water aquariums
© by WilTec Wildanger Technik GmbH
Artikel 51656–51659
Seite 4
http://www.WilTec.de
http://www.aoyue.eu
11 2020
-1
