SUNSTONE PicoDC, User Manual, Page: 35 / 46

Questions? Call or Text +1-801-658-0015 •
31
The Micro Welder Experts
SYSTEM PANEL (D)
Tap the System Button to access the following tools (as
shown in Figure 31.1):
Restore All Defaults (E)
Press the Restore All Defaults Button (E) to set all weld -
er settings to factory default status.
Clear All Memory (F)
Press the Clear All Memory Button (F) to erase all mem -
ory including saved schedules and weld history.
Update Welder (G)
To update the Pico’s software using a USB drive, press
the Update Welder Button (G) and follow the instruc -
tions that appear on the screen or see instructions
below.
Update Welder Over Wi-Fi (H)
To update the Pico’s software over a Wi-Fi connection,
press the Update Welder Over Wi-Fi Button (H) and
follow the instructions that appear on the screen. See
detailed instructions below.
Note: The Pico must be connected to a Wi-Fi connec -
tion with Internet access. A popup message will appear
with prompts and inputs to connect to Wi-Fi.
Enter Test Suite (I)
The Test Suite is helpful for diagnostics and technical
support and can only be accessed with a password.
Contact Sunstone Support if this password is needed.
System Information (J)
System Information (J) is displayed at the bottom of the
Settings Screen.
Figure 31.1. Use the features on the System Panel to
manage welder memory, update the welder’s software,
or enter the Test Suite.
D
E
F
G
I
J
H