26
• Questions? Call or Text +1-801-658-0015
User Manual
250
i
Ω
MEGA
energy adjustments without using hands or looking away from the scope. Touch detect triggering is
required when Dynamic Energy Adjustment mode is enabled.
•
Save Load Mode:
Access to saving/loading settings (see the Save/Load Screen section on page 32).
•
Seam Options:
This Mini-Screen is only available in Arc mode. Use this screen to adjust the Seam Dura-
tion and the Seam Welds Per Second. Seam mode will attempt to do X number of welds in Y seconds,
where X is the Seam Welds Per Second, and Y is the Seam Duration. This will release a lot of energy over
the course of the seam weld, so
be aware the workpiece and handpiece can get hot.
Help and Accessibility
•
Description Mode:
A short description will appear for various buttons/sliders when they are in use.
•
Keypad Mode:
The numbered keypad will stay visible when this mode is selected.
•
Weld Counters:
View and reset weld counters. Two weld counters are available. Press the respective
Reset Weld Count Buttons to return counter values to zero.
Communication Screen
Pressing this icon will open up the Communication Screen. The Communication Screen has three different sub-
screens: the PLC Screen, the Remote Schedule Select Screen, and the Active Alarms Screen.
PLC SCREEN
The PLC Screen has three areas: The Connector Pinout, the PLC Outputs, and the PLC Inputs. See Figure 26.1.
Connector Pinout
The top half of the PLC Screen shows the connector pinout. This will be beneficial for initial setup of your sys
-
Figure 26.1. In the
Communications Screen, when
you touch the PLC Button, the
screen is organized into three
main areas:
Connector Pinout
PLC Inputs
PLC Options
