ADJUSTING MAJOR PARTS OF THE MACHINE
13
75
13.1) ADJUSTING THE TRIMMERS
13.1.1) Adjusting the Position of Movable Blade
The initial setting position of the moving mes means its starting position of motion and the basic position of
determining trimming timing.
1) When adjusting the initial setting position of the
moving mes, first of all check whether the moving
mes is installed at the right position (The front end
should be located at 2.5mm away from the fixed
screw for the fixed mes.)
If the position of the moving mes is inappropriate,
the upper thread separation and the failure in
cutting could result.
2) If the position of the moving mes is inappropriate,
loosen the tightening screw for the crank, and
manually move the moving mes for adjustment.
When adjustment is completed, tightly fasten the
crank tightening screw. .
13.1.2) Adjusting Space between Movable Blade and Hook
To adjust a space between the movable blade and the hook, remove or insert a spacer (t 0.1) between the
blade base and the hook base. In the case of spacer removal, make sure to check if the hook does not
interfere with the movable blade.
2.5mm
Blade base
Spacer
Hook
holder
Movable blade
Fixed blade
Check whether interference occurs.
Hook base
Turn OFF the main power when adjusting the machine.
CAUTION
