28
8.1.7) NEEDLE STOP CLUTCH (JUMP)
The needle bar will not move when you pull the jump clutch lever. Pull the level to the operator to do jump
work.
Manual jump clutch lever
Manual jump clutch lever
3) Deletion of Thread-Break Detection Function
Poor function of the thread detecting roller due to foreign substances around it may result in wrong and
frequent detections, causing inefficiency of work. In this case, you can turn off the detecting function by
turning off the toggle switch at the end of the thread tension adjustment board as shown in figure. This
will turn off the detecting function on the head you are working with.
[Standard head]
[Coiling head]
1) The trimmer and the take-up lever continue to move even when the needle bar is stopped by
the clutch. Avoid any operations, i.e. threading the needle or changing thread.
2) Long-time operation of the needle bar with the clutch may damage the bar controller.
CAUTION
