40
8.1.13) Things to consider when using an Floppy Disk or a USB memory stick
When handling this input/output device, the following instructions should be strictly observed.
▶
In case of using an FDD:
– Place the FDD away from objects creating magnetism or magnets. ex) TV, radio, etc.
– Keep the FDD away from heat, humidity, and direct sunlights.
– Do not place heavy objects over the FDD.
– Do not remove a diskette from the disk drive, while the disk formatting or the data input/output is
conducted.
– Do not leave the disk drive cover stay open.
– If the writing prevention tap is on, data input to the FDD is impossible.
– If one diskette is used for multiple reading and writing activities, the diskette may develop errors.
– Produce a backup diskette to safely keep important data.
▶
In case of using an USB memory
– While the input/output work is in progress, do not remove the USB memory from the USB port.
8.1.15) Removal of USB memory stick
Press the exit button to remove the disk from the FDD.
In case of an USB, close the input/output window and remove the USB memory.
8.1.16) Operation related to embroidery design input/output
Embroidery design can be imported to the OP Box from outside by using a floppy disk, USB memory, CF
card or serial communications.
Embroidery design output can be conducted by using a floppy disk and a USB memory.
8.1.14) Floppy disk and USB memory inserting
– Floppy disk inserting
Press the arrow part to open the cover.
Insert an FDD into the arrow direction.
– USB inserting
Insert the USB memory into the USB port.
1) The floppy disk sold in the market can be used after formatting.
But make sure of using a certified disk product.
2) In case of using a USB memory stick, its file system should be FAT 16.
If it is FAT 32, the memory stick cannot be used.
CAUTION
Do not remove a floppy disk from the FDD in the middle of formatting or data input/output
operation.
Otherwise, the stored data might be deleted.
CAUTION
