7-33
�
X/Y PRIORITY
Set the priority between X and Y directions.
�
DESIGN INTERVAL
You can select STOP CODE or JUMP CODE to move the design.
20mm
Moving –20mm
Start point of design
[X set as priority]
[Y set as priority]
Move
Move
STOP CODE : design moves to the next location and stops.
JUMP CODE : design moves to the next location and automatically starts work.
�
NEEDLE BAR SET-UP
Needle bar set-up should be different for STOP and JUMP CODES.
①
STOP CODE: color change is automatically added at the start point of the design. In the case of using four
colors, the following revision is made:
②
JUMP CODE: color change is not added automatically, so you are to select the exact number of colors used.
(+ 20 mm)
�
Start point of design
(– 20 mm)
�
�
�
6
3
�
1 → 2 → 3 → 4
1 → 1→ 2 → 3 → 4
5
4
2
1
6
5
4
2
3
1
