7-8
2) Menu Screen (LCD)
Displays the set-ups and the main & sub menus selected.
①
Set-up
There are 10 types of set-up information. Four will be listed at a time. Press UP or DOWN on the right side of
the LCD screen to move to another screen.
No.: memory number of the selected design
NAME: displays the name of the selected design
STITCH: number of total stitches in the selected design
COLOR: number of color changes (needle bars) in the design
JUMP: number of jump stitches in the design
X[mm]: the X dimension (left to right) of the selected design
Y[mm]: the Y dimension (top to bottom) of the selected design
ANGLE: the selected orientation of the design by degrees
MIRROR: if the reverse function is selected
MIRROR: if the reverse function is selected
X_SCALE: if the design has been scaled up or down in the X direction
Y_SCALE: if the design has been scaled up or down in the Y direction
The above data are accurate based on instant calculation.
②
Sub Menus
Main menus are selected by keys on the control panel. Sub menus will appear on the screen at your selection
of a main menu. All sub menus cannot be indicated on a single screen. Use UP/DOWN buttons to move to
another screen.
Ex) selection of basic set-up
NO
:
8
NAME
:
SWF
STITCH
:
16850
COLOR
:
6
JUMP
:
118
X [mm]
:
83.4
Y [mm]
:
101.6
ANGLE
:
45
MIRROR
:
OFF
X_SCALE
:
100
Y_SCALE
:
100
1] X_SCALE
:
100%
2] Y_SCALE
:
100%
3] ANGLE
:
0
�
�
4] MIRROR
:
NO MIRROR
