background image

Shenzhen SUNSKY Technology Limited 

 

6

button Means 

Power key 

Turn on/off the product by press it 3-5s;

End the calls by press one time 

SOS 

If time of pressing SOS button bigger 

than 3 seconds, it will send location 

information to one of the three 

re-stored telephone numbers, And it 

will dial the first telephone which saved 

in advance, if there is no answer it will 

call the second number, and analogy. 

 

2.2 Charge  battery 

Before using V 520, to lengthen the battery service life, suggest in closes down under the 

condition to charge completely at least for 12 hours.   

Note

: The DC port can only make the charge use. Please do not meet other equipment. If 

connects the initiation question arbitrarily, is generally irresponsible. 

 

2.3 Buy A SIM card 

Buy a SIM card from local service provider. 

Please make sure that your SIM card support SMS function and have enough deposit. 

 

2.4 switch on / switch off   

Switch on: 

When the device is on, press the button to off side and wait for 3 seconds. The green LED and 

blue LED are light.   

When the device is off, press the power button to on side and wait for about 20 seconds. It will 

enter standby mode.

   

It is suggested that you stay an outer place where it can receive the better GPS signal when 

Summary of Contents for V-520



































Reviews: