Shenzhen SUNSKY Technology Limited
15
(Accuracy for 5 after the decimal point, the following zero cannot bypass)
Rzzz.z is radius for the domain (999.9 - 0.1), unit for KM.
When the tracker receives this instruction, judges to be authorized users and confirms the user
password correctly, it will send the confirmation messages “SET GEO-FENCE OK” to the
sender.
Format 3
：
005+ user password Rzzz.z
Explanation
: When the tracker receives this instruction, judges to be authorized users and
confirms the user password correctly, it will send the confirmation messages “SET
GEO-FENCE OK” to the sender. If the GPS data is invalid, it will receive the next one, if it can’t
get valid data, it will re-back the message: ERROR GPS DATA, TRY AGAIN LATER. Then
Restored to its original state (on/off/adaptive).
Note:
1. Radius of the fence can not exceed the definition of its domain; the value of the
decimal part for zero must input zero fill. For example: R=1, it is important to enter into 1.0.
2. If the calling state is off, it will not call the user telephone number, and only send
messages to the present number.
3. Degree and minute is divided into sexagesimal system converter, that is, 1d = 60m
2) open the electronic fence
: 211 + user password
After set successfully, it will send the confirmation messages “GEO-FENCE ON” to the sender.
3) close the electronic fence
: 210 + user password
After set successfully, it will send the confirmation messages “GEO-FENCE OFF” to the
sender.
3.1.11 historical data upload feature
it need to switch to GPRS mode to set IP, APN and so on in SMS mode, specific instructions
and upload format may see the 3.2 based on GPRS operation.
1, historical data records set instruction
Format:
# 807 # Password # X # #
Example
: # 807 # 0000 # 30 # #
Note:
X is a historical record of the sampling frequency, an integer number, the definition of
