SunSetter Motorized PRO, Owner'S Manual And Installation Instructions

Page: 8 / 36

5
Additional Parts List - Motorized Models Only
Optional Parts List - Masonry, Brick or Concrete Installations
(available for all models)
3/8” x 6” Masonry Drill Bit, Qty 1 (For Masonry Walls)
8’ Awning = Qty 4
10’ - 13’ Awning = Qty 6
14’ - 16’ Awning = Qty 8
17’ - 20’ Awning = Qty 12
Other Optional Items Packaged in the Same Tube
with your Awning (if purchased with your Awning)
a. Cover b. Wireless Wind Sensor c. Wireless Wall Switch d. All-Weather Remote
3/8” x 4” Masonry Bolt (For Masonry Walls)
3/8” x 5” Masonry Bolt (For Masonry Walls)
Note :
For XL Awnings, substitute half of the
4” Masonry Bolts with 5” Masonry Bolts
Use 5” Masonry Bolt in bottom XL Bracket hole
Wall Mount for
Remote Transmitter, Qty 1
THREADED
ANCHOR
PLASTIC
ANCHOR
SCREW
WALL POST
MultiChannel Remote
Transmitter, Qty 1
A Spare CR2430 Lithium Battery
for the Remote Transmitter is
packaged in the clear bubble pack
taped to the Motor Power Cord.
Note: Awning is preset to operate on Channel 1.
• Check the active Channel by briefly pressing the Channel
Selector Button. The active Channel Light will blink.
• Change Channel by pressing the Channel Selector Button.
• Press the Channel Selector Button again while the Channel
Indicator Light blinks and the next Channel will be selected.
CLOSE
OPEN
my/STOP
Channel Selector Button
Channel Indicator Lights