background image

32

(b) 

Mildew on the fabric. Mildew will not form on the 

fabric itself, but may form on dirt and dust that have 

not been removed from it. Please see maintenance 

instructions for proper cleaning-out-lined in owner’s 

manual. 

(c)

 Excessive cracking or peeling under normal 

conditions if maintained, operated, used, and stored 

in accordance with the instructions contained in 

the Owner’s Manual & Installation Instructions, 

and provided that the Awning is not subjected to 

excessive winds or water pooling on the fabric. 

GEAR MECHANISM (VISTA Model only)

 is warranted 

for five (5) years not to fail under normal conditions if 

maintained, operated, used, and stored in accordance 

with the instructions contained in the Owner’s 

Manual & Installation Instructions. 

ELECTRIC MOTOR (Motorized Models only)

 is 

warranted for five (5) years not to fail under normal 

conditions if maintained, operated, used, and stored 

in accordance with the instructions contained in the 

Owner’s Manual & Installation Instructions. 

AWNING ACCESSORIES

 (defined as accessories 

attached to the Awning) are warranted for five 

(5) years not to fail under normal conditions if 

maintained, operated, used, and stored in accordance 

with the instructions contained in the Owner’s 

Manual & Installation Instructions. 

F. WHAT IS NOT COVERED UNDER THIS WARRANTY?

 

1.

 The SunSetter Awnings are not designed to be used 

for carports and are not designed to be installed on 

moving vehicles. Any damage that results from the 

Purchaser’s use of SunSetter Awnings for carports or 

on moving vehicles is not covered by this warranty. 

2.

 Any failure or damage of the components that 

results from any intentional or negligent actions by 

the purchaser or by any other person is not covered 

by this Warranty.  

3.

 It is the responsibility of the purchaser to securely 

fasten the Awning to studs, joists, headers or other 

structural members. Any failure or damage that 

results from the Awning falling from its installed 

position is not covered by this Warranty. 

4.

  Labor charges connected with installation of 

replacement parts are not covered by this Warranty. 

5.

 Freight expenses to and from SunSetter Products, 

in shipping damaged or replacement parts, are not 

covered by this Warranty and must be paid by the 

purchaser. 

6.

  Stretching of Fabric or damage to any structural 

component caused by wind or water pooling on the 

Fabric or any other weather are not covered by this 

Warranty. 

7.

 Any modification or addition to the Awning 

structure and support system or to the electric 

motor will nullify this Warranty and relieve SunSetter 

Products from any responsibility or liability under this 

Warranty. 

G. GENERAL PROVISIONS AND LIMITATIONS 

1. THE WARRANTY GRANTED HEREIN IS THE 

EXCLUSIVE REMEDY FOR THE PURCHASER.  

SUNSETTER PRODUCTS MAKES NO OTHER 

WARRANTIES TO THE PURCHASER, EXPRESS, 

STATUTORY, IMPLIED OR OTHERWISE AND ALL 

IMPLIED WARRANTIES, INCLUDING WITHOUT 

LIMITATIONS, IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE, ARE HEREBY DISCLAIMED. 
2. TO THE EXTENT PERMITTED BY LAW, SUNSETTER 

PRODUCTS SHALL HAVE NO LIABILITY TO THE 

PURCHASER OR ANY OTHER PERSON FOR 

INCIDENTAL, SPECIAL, CONSEQUENTIAL, INDIRECT 

OR SIMILAR DAMAGES OF ANY KIND OR NATURE 

WHATSOEVER, WHETHER ARISING OUT OF BREACH 

OF WARRANTY OR OTHER BREACH OF CONTRACT, 

NEGLIGENCE OR OTHER TORT, OR OTHERWISE, 

EVEN IF SUNSETTER PRODUCTS SHALL HAVE BEEN 

ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF 

SUCH POTENTIAL LOSS OR DAMAGE. IN NO EVENT 

SHALL SUNSETTER PRODUCTS BE LIABLE FOR LOSS 

OF PROFITS AND/OR WAGES. 
3.

 Some states do not allow limitations on how 

long an implied warranty lasts, or do not allow the 

exclusion or limitation of incidental or consequential 

damages, so the above limitations may not apply to 

you. 

4.

 This warranty gives you specific rights and you may 

have other rights which vary from state to state.  

Summary of Contents for Motorized PRO





































Reviews: