background image

Technical product information   |   89

Trophy 20

Technical product information   |   89

Technical product information

7.1  CE Declaration and standards

This product complies with the regulations of the Medical Devices Directive and therefore
bears the CE mark.

Standard

Defi nition/description

Weight test dummy

EU guideline 93/42 EEC Applicable as mentioned in Appendix 1

N/A

NEN-EN 12182 (2009)

The requirements from EN12182 as mentioned in NEN-EN 12184 (1999): 
Technical aids for the handicapped – General requirements and test methods 
October 1997

160 kg

NEN-EN 12184 (2009) 
Class B

Electric wheelchairs, scooters and accompanying battery chargers – 
Requirements and test methods 2009

160 kg

ISO 7176-8

Requirements and test methods for static, impact and fatigue strengths July 
1998

160 kg

ISO 7176-9

Climate tests for electric wheelchairs and scooters

N/A

ISO 7176-14

Requirements and test methods for control systems for electric wheelchairs 
1997

N/A

ISO 7176-16

Requirements for resistance to ignition of upholstered parts May 1997

N/A

7.2 Technical 

specifi cations

Manufacturer

Sunrise Medical HCM

®

Model

Trophy 20 3 wheels (3W)
Trophy 20 4 wheels (4W)

Maximum user weight

160 kg (25.2 stone)

Description

3W

4W

Total length

mm (inches)

1265 (49.8)

1265 (49.8)

Total width

mm (inches)

660 (26)

660 (26)

Minimum height*

mm (inches)

740 (29.1)*

740 (29.1)*

Total weight excluding batteries

kg (stones)

92 (14.5)

102 (16.1)

Total weight including batteries (74 Ah C20)

kg (stones)

140 (22)

150 (23.6)

Weight of heaviest component

kg (stones)

70 (11)

80 (12.6)

Static stability in the downward direction

°

> 13

> 13

Static stability in the upward direction

°

> 13

> 13

Lateral static stability

°

> 13

> 13

Distance range (ISO 7176-4)**

km (miles)

45 (28)

45 (28)

Dynamic stability (max. safe slope)

°

9

9

Maximum speed forwards

km/h (mph)

12 (7.5) / Alpine

12 (7.5) / Alpine

Back angle, Captain Seat

°

0 / 103 - 126

0 / 103 - 126

Seat depth, Captain Seat

mm (inches)

445 (17.5)

445 (17.5)

Seat width, Captain Seat

mm (inches)

457 (18)

457 (18)

Back height (excl. headrest), Captain Seat

mm (inches)

406 (16)

406 (16)

Seat height (to platform), Captain Seat

mm (inches)

350*** / 450 - 535
(13.8 / 17.7 - 21.1)

350*** / 450 - 535
(13.8 / 17.7 - 21.1)

Armrest height, Captain Seat

mm (inches)

229 - 273 (9 - 10.7)

229 - 273 (9 - 10.7)

Distance between armrests, Captain Seat

mm (inches)

457 - 610 (18 - 24)

457 - 610 (18 - 24)

Back angle, Master Seat

°

45 - 85 - 180

45 - 85 - 180

Seat depth, Master Seat

mm (inches)

430 (17)

430 (17)

Seat width, Master Seat

mm (inches)

500 (19.7)

500 (19.7)

Back height (excl. headrest), Master Seat

mm (inches)

550 (21.7)

550 (21.7)

Seat height (to platform), Master Seat

mm (inches)

350*** / 425 / 535
(13.8/16.7/21.1)

350*** / 425 / 535
(13.8/16.7/21.1)

Armrest height, Master Seat

mm (inches)

150 - 340 (5.9 - 13.4)

150 - 340 (5.9 - 13.4)

Distance between armrests, Master Seat

mm (inches)

500 (19.7)

500 (19.7)

Turning radius (ISO 7176-5)

mm (inches)

1030 (40.6)

1600 (63)

Reversing width

mm (inches)

1460 (57.5)

1810 (71.3)

Obstacle height (max. user weight)

mm (inches)

80 (3.1)

80 (3.1)

Ground clearance (max. user weight / loaded)

mm (inches)

70 (2.8)

70 (2.8)

Summary of Contents for TROPHY 20









































































































Reviews: