manualshive.com logo in svg

Sunrise Medical TROPHY 20, Service Manual

The Handicare TROPHY 20 user manual is available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions for operating and maintaining your Handicare TROPHY 20, ensuring optimal performance and user satisfaction. Get your manual now and unlock the full potential of this exceptional product.

Share
Download
background image

Trophy 20 

60   |   Service instructions 

 

60   |   Service instructions 

5.4.4 Steering 

column

Replacing the steering wheel

Preparation

•  Switch off the scooter with the ignition key.
•  Disconnect the batteries.

Instructions

The following operations are required to replace the 
steering column:

Note!

 Suitable work area required!

•  Remove the basket and the mounting bracket for the 

mirrors.

•  Remove the tiller cover front
•  Disconnect all connectors from the tiller PCB.
•  Remove the two Ejot screws and washers to remove the 

rear cover steering column.

•  Remove the bolt to remove the steering wheel.
•  Mount the new steering wheel.
•  Rebuild the scooter in the reverse order. 

Relevant article numbers

•  9004185 Steering wheel

Tools used

•  Socket, 10 mm
• Screwdriver, 

crosshead

•  Allen key, 6 mm

Notice

•  Make sure the scooter is switched off.

1

 

2

3

4

Summary of Contents for TROPHY 20









































































































Reviews:

No comments

Related manuals for TROPHY 20

Brands by name

Popular brands

Load more brands