930473 Rev. B
20
E n g l i s h
X I . M a i n t e n a n c e / X I I . T r o u b l e s h o o t i n g
F. MAINTENANCE CHART
You should check the items on this chart at the indicated intervals. If any of the items are
loose, worn, bent or distorted, immediately have them checked and/or repaired by your
authorized Sunrise supplier. Frequent maintenance and servicing will improve performance,
extend seating system life, and help prevent injuries.
NOTE–
Check weekly, and use a clean dry cloth or compressed air as needed to keep glide bearings free
of debris.
XII. TROUBLESHOOTING
Glide bearings free of debris
✓
Check plugs and connectors for proper connections
✓
Check all moving parts for wear
✓
Inspect actuator shafts for cleanliness and wear
✓
Inspect all nuts, bolts and fasteners for looseness or wear
✓
Inspect upholstery for wear
✓
Operate seating systems re-home seat function
✓
Servicing by authorized Supplier
✓
Check...
W
eekly
M
o
n
thly
Qu
arterly
Ann
u
ally
PROBLEM
The seating system does not respond to
joystick commands OR any time power is
removed or batteries are unplugged.
The seating actuators are moved with
power off, or a seating system element no
longer moves within its desired range
You detect a significant increase in the
noise level during operation.
An actuator stops moving or moves
intermittently.
Detect noise of anti-tip lockout actuator
during recline/tilt activation and return.
SOLUTION
Reapply power if it has been removed and
wait 2 minutes. Push “Reset” button on
front of the QMAC Controller– located
under the seat pan.
Home the seating system.
(Refer to section XI: E)
Check for loose fasteners.
Check for damaged wires or loose connec-
tors. Also check to see if all components
are free to move - insure actuator is not
binding.
No problem– this is a normal and neces-
sary part of operation. See note under
Section VIII.
Summary of Contents for Quickie Smart Seat
Page 23: ......
