background image

56

2 Millennium  Issue 7

Sunrise Medical

Your new Quickie 2 Millennium is manufactured in the West Midlands by

Sunrise Medical. With over 30 years experience, we are one of the longest

established mobility equipment manufacturers in the UK. All our

Wheelchairs, Powerchairs, Scootas and Stairlifts undergo rigorous tests to

ensure that they meet our requirements of comfort, safety and durability.
Our success is based on the strong traditions of quality, value for money

and genuinely caring for our customers.

We pride ourselves not only on designing and building the most innovative

products, but also on our commitment to offer an excellent standard of

customer service both during and after sale.

In addition to your new Quickie 2 Millennium, Sunrise also manufacture

oxygen concentrators, nebulizers, and hoists. We have a vast range of aids

to daily living which include the Merlin Bath Lifter, bed accessories and

walking sticks.

Should you require any information on our full range of products please call

us on 01384 44 66 88 or contact us at:

 Sunrise Medical Limited

High Street  Wollaston

West Midlands  DY8 4PS

www.sunrisemedical.co.uk

Summary of Contents for QUICKIE 2 Millenium
































































Reviews: