40
2 Millennium Issue 7
Fig. 60
Axle
Fig. 59
Rear axle positions seat height
This chair comes with the new QA
axle block system (Fig. 59).
Seat height can be adjusted by
moving the rear frame axle block
(1) up or down. (Fig. 60) and also
by moving the axle bracket (2) top
to bottom or visa versa.
To adjust the rear frame axle block
(1) position, remove bolt (3) with a
5mm Allen key and loosen bolt (4),
using the same 5mm Allen key.
Slide the rear frame to the desired
position and re-insert bolt (3).
Tighten to 7-12 Nm. torque.
Before tightening the bolt (4)
ensure the nut is engaged fully in
the rear frame. Then tighten bolt (4)
to 7-12Nm torque.
1
2
4
3
Summary of Contents for QUICKIE 2 Millenium
Page 1: ...Owner s Manual EN G LISH 2 Millennium...
Page 2: ...63 2 Millennium Issue 7...
Page 61: ...57 2 Millennium Issue 7...
Page 62: ...58 2 Millennium Issue 7...
