20
2 Millennium Issue 7
Fig. 20
Fig. 21
Footplates
Height adjustment of fixed front
frame flip up footplate
To adjust the height of flip up
footplates, remove bolt (1) as
shown, (use a 10mm A/F spanner)
move the footplate assembly to the
desired position, ensuring the hole
(2) in the outer tube (3) aligns with
the hole in the inner tube (4).
Replace the bolt and tighten to
4 - 7Nm torque (Fig. 21).
1
2
3
4
1
Folding the one piece footplate
To fold the one piece footplate
(Fig. 20) rotate the locking clip (1)
through 90°, so that it clears the
down tube (2).
Pull the footplate up so that the
location pin can be released from
its location (3) in the down tube.
Rotate the footrest upwards.
Replacing the footplate
Rotate the footrest downwards until
the location pin can be inserted into
the down tube.
Push the location pin down to its
stop and rotate the locking clip
under the down tube.
1
2
3
Summary of Contents for QUICKIE 2 Millenium
Page 1: ...Owner s Manual EN G LISH 2 Millennium...
Page 2: ...63 2 Millennium Issue 7...
Page 61: ...57 2 Millennium Issue 7...
Page 62: ...58 2 Millennium Issue 7...
