20
Rubix2
ENGLISH
SEAT DEPTH
By removing the clips (1), the cross-brace unit (2) can be pushed
along the frame, which then alters the seat depth (depending on the
position of the back tubes).
Make sure that the clips (1) snap into the frame holes provided.
To keep the frame as compact as possible, the seat depth can also
be adjusted by using the back tubes (41 – 51 cm in steps of 2.5 cm).
To do this remove the screws (1 and 2) on the back tube bracket.
Remove the wheels and the armrests and check that the cross-
brace is in the desired position (push the cross-brace as described
above). Move the back tubes to the desired position and re-tighten
all screws. Move the receiver tube for the armrests to the desired
position (Fig. 43).
Options – Seat depth
Fig.43
1
2
Options – Crutch holder
CRUTCH HOLDER
This device permits crutches to be
transported directly on a wheelchair. It
has a Velcro loop to fasten crutches or
other aids (Fig. 45).
CAUTION:
Never try to use or even remove the
crutches or other aids while moving.
Options - Therapy table
THERAPY TABLE
The tray provides a flat surface for
most activities. Before using a tray, it
first has to be adjusted to the width of
the seat by an authorised dealer. The
user must be sitting in the wheelchair
during this adjustment (Fig. 46).
Options – Push handles
HEIGHT-ADJUSTABLE PUSH
HANDLES
These handles are secured with pins
to prevent them from sliding out
unintentionally. By releasing the
release lever (1) you can adjust the
push handles to a height which suits
you. After any adjustment to the
height of the push handles, pull the
release lever (1) until it is tight (Fig. 44).
CAUTION:
If the lever is not secure, injuries could result when lifting over
obstacles.
1
Fig.44
Fig.45
Fig.46
Summary of Contents for Breezy BasiX2 Plus
Page 6: ...6 Rubix2 45Nm 7Nm 7Nm 7Nm 7Nm 7Nm 7Nm 45Nm 10Nm 10Nm 10Nm ...
Page 90: ...90 Rubix2 ...
Page 91: ...91 Rubix2 ...
