14
Sunrise Manufacturing International, Inc.
WINGS MANUAL
Push the nose through the center of the
parachute and pull it briskly back out.
Place the tip of the leading edge between
your knees and hold the material in place.
Count and flake the 3 right cells between
the C- and D- lines.
Starting with the A-line group, count the 3
right cells between the A- and B- line
attachment points and flake the material
away from the center of the parachute.
Count the 3 right cells between the B- and
C- line attachment points and flake the
material away from the center of the
parachute.
Count and flake the 3 right cells between
the D- lines and the Control Lines / tail.
Repeat this process on the other side of
the canopy.
Separate the nose, one half on the side,
center cell in the middle and second half
on the other side.
Raise the canopy so that it is parallel to the
floor and gently lay it on the floor.
Summary of Contents for Wings Series
