Sunred Flame Torch Black, Manual

Page: 3 / 58

www.sunred.nl
! WARNING
-
Read the instructions before installation and use.
-
This appliance must be installed and the gas cylinder stored in accordance with the regulations in force.
-
This appliance requires installation by a competent person.
-
For use only in well-ventilated areas. An amply ventilated area must have a minimum of 25% of the
surface area open. The surface area is the sum of the walls surface.
-
The use of this appliance in enclosed areas can be dangerous and is prohibited.
-
This appliance shall not be used for the heating of domestic premises.
-
This appliance shall be used for space heating only.
-
This appliance shall not be used in basements or below ground level.
-
This appliance has no atmospheric sensing device. It shall not be used for heating animal rearing and is
for outdoor use only.
-
Use only the type of gas and the type of cylinder specified by the manufacturer.
-
Do not place items on or against this appliance.
-
Do not place items on or against this appliance.
-
Do not store chemicals or flammable materials or spray aerosols near this appliance.
-
Do not operate this appliance in an explosive atmosphere like in areas where gasoline or other
flammable liquids or vapours are stored.
-
Protect the hot glass tube from rain, water splash or anything that will cause a sudden change in
temperature which may lead to cracking or shattering.
! WARNING
Turn off the gas valve immediately if smell of gas is detected. Extinguish any open flame.
If odour continues, contact your gas supplier immediately.
! WARNING
-
The user assumes all risk in the assembly and operation of the gas heater. Failure to follow the warnings
and instructions in this manual can result in severe personal injury, death or property damage.
-
If user cannot read or fully understand the instruction manual, please contact your dealer.
-
Manufacturer or supplier will not be responsible for user’s negligence.
TABLE OF CONTENTS
1. Caution
2. Heater Stand and Location
3. Gas Requirements
4. Leakage Test
5. Fuel Gas Odour
6. Operation and Storage
7. Assembly Instructions
8. Construction and Specifications
9. Assembly Procedures
10. Problems Check List