Sunrain BYC-007TF1, Installation & Operation Manual, Page: 6 / 28

- 6 -
2. Safety
Range of application:
1.Power supply: 220V-240V/1N~50Hz.
2.Ambient temperature: -15°C
〜
43°C
：
3.Working water temperature: Min. inlet water temperature 8°C,Max. outlet Water
Temperature 40°C. If the system is always used beyond the available water range,
please contact with manufacturer.
●
The installation should be done by the professional persons, to prevent leaking, electric shock or fire.
●
Confirm the ground connection, if the ground connection is not correctly done, it may cause electric
shock.
THE UNIT MUST BE EARTHED PROPERLY BEFORE USAGE
When installing the heat pump in a small room, make sure it is well ventilated.
● Don't put fingers or objects into the air inlet outlet as the rotating fan could cause serious injuries.
●
If you smell anything burning, turn off the manual power switch immediately, stop operation and contact
the after-sale service department. Continued abnormal operation may cause electric shock fire.
●
When the unit needs to be removed or re-installed, please ensure that the work is carried out by
qualified professionals. If the installation is not correct, it may cause unit operation failure, electric shock,
fire, hurt, leaking, etc.
●
Please ensure that any repairs carried out by qualified professionals: failure to make proper repairs
could cause unit operation failure, electric shock, fire, hurt, leaking, etc..
● Do no install the unit near flammable sources, as any leakages could cause a fire.
●Make sure the base on which the unit is installed
is strong enough to support it.
●
Make sure a leakage protection switch is installed to prevent electric shock or fire.
●
When cleaning the unit, stop operation, switch off the power and disconnect the power.