17
4.
HEIGHT MEMORY:
Press and hold S button and number button at the same time until the
buzzer rings. The current position will be saved under the number button. Press the saved
number button. The lifting table will move up or down to the saved position. When moving to the
save position, press any button except the “S” button and the lifting table will stop moving to the
desired position.
5.
S BUTTON:
Press and hold the S button to enter self-check mode. The digital tube displays
"000" and flashes simultaneously. The table will automatically learn the highest and lowest
positions, and display the normal position after self-check. Press and hold the S Button and the
number button simultaneously to save the current position.
6.
RESISTING REBOUND:
When the lifting table moves up or down, it will encounter a large
amount of resistance. The buzzer will then ring. The lifting table will run a certain distance in the
opposite direction before stopping.
7.
INCH-CENTIMETER SWITCH:
Press and hold the up, down and number ”3” buttons at the
same time. The display will be switched to inch-centimeter display after the buzzer rings.
8.
LOW POWER DORMANCY:
When the lifting table is not used for more than 5 minutes, it will
enter sleep mode. When it is in sleep mode, press any button to wake up.
Summary of Contents for SF-TD7884
Page 3: ...2 EXPLODED DIAGRAM...
Page 21: ...20...
