Sunny SF-RB4876, User Manual

Page: 11 / 14

10
EXERCISE COMPUTER
FUNCTION BUTTONS:
MODE:
Press the button to select TIME, DISTANCE, AND CAL to preset.
Press the button for selection function display value on LCD or
enter after setting.
Press the button and hold for 3 seconds to reset all values except
odometer to zero.
(When user replaces the batteries, all the values will reset to
ZERO automatically.)
SET: To set up the target value of TIME, DISTANCE, and CAL. Press
the button and hold for 2 seconds to speed up the increment.
RESET: Press the button to reset function value when setting.
Press the button and hold for 3 seconds to reset all values except
odometer to zero.
(When user replaces the batteries, all the values will reset to ZERO automatically.)
FUNCTIONS & OPERATIONS:
1.
BATTERY INSTALLATION:
Please install 2 AAA 1.5V batteries in the battery case on the back of computer. (Whenever
batteries are removed, all the function values will be reset to zero.)
2.
AUTO ON/OFF:
Once the user begins to exercise, the computer will show the workout value automatically. After
about 4 minutes of inactivity, the computer will turn off. Odometer value does not reset to 0
when the computer turns off. When the user starts to exercise again, the workout value of
odometer will accumulate continuously.
3.
AUTO SCAN:
After the computer is powered on, press Mode button and the LCD will display all function
values from TIME-SPEED-DISTANCE-CALORIES-ODOMETER-PULSE. Each value will be
shown for 6 seconds.
4.
SPEED:
Displays the current training speed from 0.0 to 99.9 MPH (miles per hour).
5.
DISTANCE:
Accumulates total distance from 0.00 up to 9999 M (miles). The user may preset target distance
by pressing the SET & MODE button. Each increment is 0.1 M (miles). Automatically counts
down from targeting value during exercise.
6.
TIME:
Accumulates total time from 00:00 up to 99:59. The user may preset target time by pressing
SET & MODE button. Each increment is 1 minute. Automatically counts down from targeting
value during exercise.