Sunny Health & Fitness SF-RW5728, User Manual

Page: 7 / 11

6
STEP 4:
Attach
Rear Support (No. 12) onto
Sliding Rail (No. 10) with 4 Flat
Washers (No. 52) and 4 Screws
(No. 46) . Secure and tighten with
Allen Wrench (No. 57) .
STEP 5:
Attach
Sliding Rail (No. 10) onto
Main Frame (No. 11) . Make sure
that the hole on position e of Sliding
Rail (No. 10) is aligned to the hole
on position b of Main Frame (No.
11) (as picture A and picture B
showed).
Insert
Connecting Axle (No. 16)
into the holes on position e and b
with 2
Flat Washers (No. 53) and 2
Nuts (No. 42) . Secure and tighten
with 2 Open End Wrenches (No.
58) .
Make sure that the hole on position
d of Sliding Rail (No. 10) is aligned
to the hole on position a of Main
Frame (No. 11). Then insert Pull
Pin (No. 13) to tighten.
Connect
Trunk Wire (No. 56)
with
Sensor Wire (No. 55).
The assembly is complete.