Sunny Health & Fitness SF-RB4880, User Manual

Page: 8 / 20

8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 3:
Remove the Screw (No. 24) with Spanner (No.
98) to separate Handlebar Cover (No. 25a) and
Handlebar Cover (No. 25b). (Figure A)
Remove the Sleeve (No. 33) and Flat Washer
(No. 34) from the Plastic Handle Screw (No.
32).
Attach the Handlebar (No. 5) to the Handlebar
Post (No. 4) , adjust the Handlebar (No. 5) to the
suitable position, and then insert the Plastic
Handle Screw (No. 32) through Handlebar
Cover (No. 25a), Sleeve (No. 33) and Flat
Washer (No. 34) . Tighten the Plastic Handle
Screw (No. 32) to secure.
STEP 4:
Remove 4 Screws (No. 31) from the back of the
Meter (No. 38) using Spanner (No. 98).
Connect the 2 Pulse Extension Wires 2 (No. 37)
and Extension Wire (No. 22) with corresponding
wires of Meter (No. 38).
Note: Make sure all the wires are in the tube of
the Handlebar Post (No. 4).
Attach the Meter (No. 38) to the Handlebar Post
(No. 4) with 4 Screws (No. 31) that were just
removed. Tighten and secure with Spanner (No.
98).
Lock the Handlebar Cover (No. 25b) to the
Handlebar Post (No. 4) with the Screw (No. 24)
using Spanner (No. 98).
Figure A