Sunny Health & Fitness SF-RB4880, User Manual

Page: 7 / 20

7
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 1:
Attach the Lifting Handle (No. 27) to the Rear
Stabilizer (No. 3) with 2 Bolts (No. 26) and 2 Arc
Washers (No. 20) using Allen Wrench (No. 97) .
Remove 2 Shipping Tubes (A) , 4 Bolts (No. 13) ,
4 Spring Washers (No. 14) and 4 Arc Washers
(No. 15) from the Main Frame (No. 1) using
Allen Wrench (No. 97) .
Attach the Front & Rear Stabilizer (No. 2 & 3) to
the Main Frame (No. 1) with 4 Bolts (No. 13) , 4
Spring Washers (No. 14) and 4 Arc Washers
(No. 15) that were just removed. Tighten and
secure with Allen Wrench (No. 97).
Note: You may discard shipping tubes or save
them in case you’d like to
repackage the item in
the future.
STEP 2:
Remove 4 Screws (No. 19) , 4 Spring Washers
(No. 14) and 4 Flat Washers (No. 7) from the
Main Frame (No. 1) using Allen Wrench (No.
97).
Connect the Sensor Wire (No. 21) with
Extension Wire (No. 22) , and then connect 2
Pulse Extension Wires 1 (No. 36) with 2 Pulse
Extension Wires 2 (No. 37).
Attach the Handlebar Post (No. 4) to the Main
Frame (No. 1) with 4 Screws (No. 19) , 4 Spring
Washers (No. 14) and 4 Flat Washers (No. 7)
that were just removed. Tighten and secure with
Allen Wrench (No. 97) .
Note: Do not cut or pinch any wire when
attaching the Handlebar Post (No. 4).
Attach the Front Covers (No. 23L/R) to the Main
Frame (No. 1) with 3 Screws (No. 24) . Tighten
and secure with Spanner (No. 98).