SUNLIT TECH Ultimate W5905 User Manual Download Page 4

Phenomenon

RF emissions

Harmonic distortion

Voltage fluctuations 

and flicker

Compliance

CISPR 11 Group 1, Class B

IEC 61000-3-2 Class A

IEC 61000-3-3Compliance

Electromagnetic environment

Home healthcare environment

Home healthcare environment

Home healthcare environment

The use of accessories, transducers and cables other than those specified 

or provided by the manufacturer of this equipment could result in increased 
electromagnetic emissions or decreased electromagnetic immunity of this 

equipment and result in improper operation. WARNING: Portable RF 

communications equipment (including peripherals such as antenna cables 
and external antennas) should be used no closer than 30 cm (12 inches) to 

any part of the W5907, including cables specified by the manufacturer. 

Otherwise, degradation of the performance of this equipment could result.” 

WARNING:

 If the use location is near (e.g. less than 1.5 km from) AM, FM 

or TV broadcast antennas, before using this equipment, it should be 
observed to verify that it is operating normally to assure that the equipment 
remains safe with regard to electromagnetic disturbances throughout the 
expected service life. 
When the AC input voltage is interrupted, the equipment will stop battery 
charging and if the power supply restored, it could be recovered 
automatically, this degradation could be accepted because it will not lead 
to unacceptable risks and it will not result in the loss of basic safety or 
essential performance.

5

6

2.    PRECAUTIONS FOR SAFE USE

EMI Compliance Table (Table 1) 
Table 1 - Emission

Phenomenon

Electrostatic 

Discharge

Radiated RF 

EM field

Proximity fields 

from RF wireless 

communications 

equipment

Rated power 

frequency 

magnetic fields

Basic EMC standard

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-3

IEC 61000-4-8

Immunity test levels
Home healthcare environment

±8 kV contact 

±2kV, ±4kV, ±8kV, ±15kV air
20V/m 

26MHz-2.5GHz 

80% AM at 1kHz 

10V/m 

80MHz-2.7GHz 

80% AM at 1kHz

Refer to table 3

30A/m 

50Hz or 60Hz

EMS Compliance Table (Table 2-5) 
Table 2 - Enclosure Port

Table 3 – Proximity fields from RF wireless communications equipment

Test frequency

(MHz)

Band (MHz)

385

380-390

Immunity test levels
Home healthcare environment

Pulse modulation 18Hz, 27V/m

450 
710 
745 
780 
810 
870 
930 
1720 
1845 
1970 
2450 
5240 
5500 
5785

430-470 

704-787 

800-960 

1700-1990 

2400-2570 

5100-5800

FM, ±5kHz deviation, 1kHz sine, 28V/m

Pulse modulation 217Hz, 9V/m

Pulse modulation 18Hz, 28V/m

Pulse modulation 217Hz, 28V/m

Pulse modulation 217Hz, 28V/m

Pulse modulation 217Hz, 9V/m

Summary of Contents for Ultimate W5905



















Reviews: