SUNLIT TECH Ultimate W5905 User Manual Download Page 17

31

32

9.   MAINTENENCE AND REPAIR

9.

   MAINTENENCE AND REPAIR

 

9.1

 Maintenance

Like other motorized vehicle, your power wheelchair also requires routine 
maintenance. Some checks can be performed by yourself, others you can 
ask for assistance from your service agent. Preventive maintenance is very 
important. 
If you follow the maintenance and checks in this section, your wheelchair 
will give you years of trouble-free operation. For any questions regarding 
the maintenance or operation of the wheelchair, please contact your 
dealer or our after-sales service dept. 
9.1.1 Humidity 
Your wheelchair, like most electrical and mechanical equipment, is 
susceptible to external conditions. In any case, the wheelchair should be 
avoided damp environment. Direct or prolonged exposure to water or 
dampness could cause the wheelchair to malfunction electronically and 
mechanically. Water can cause electrical components to corrode. 
9.1.2 Temperature 

 Some parts of your wheelchair are susceptible to temperature. 

 Too high or too low temperature will affect the performance of the 

wheelchair.
9.1.3 Regular guidance

 Avoid knocking or hitting the control units. 

 Avoid prolonged exposure of your wheelchair to extreme conditions, 

such as overheat, undercooling or moisture environment. 

 Keep the controller clean. 

 Check all connections, and ensure that they are all tight,secure and not 

corroded. 

 If the battery indicator on the controller only shows red, indicating that 

the battery is low, it should be charged immediately. 

 All wheel bearings are lubricated and sealed. No need to lubricate them.

9.1.4 Maintenance after use 

 Turn off the power.

 Inhibit children and unconscious persons to use the wheelchair.

 Store the wheelchair in normal temperature to prevent deformation so 

that it keeps its performance for long period. 

 Clean the wheelchair with a clear and soft cloth and dry it. Never use any 

chemicals to clean it.(to prevent deformation and discoloration). 

 Remove the cloth cover of the seat rest to be washed if it is dirty, and 

then dry it for use.
9.1.5 Daily Checks 
In order to keep the wheelchair always in good condition, you should 
check it before each use and keep weekly, monthly, semi-annual check. 
See the table below for the inspection items.

9.1.6 Cleaning

 Never wash your wheelchair with water or expose directly to water.

 Surface of wheelchair frame is coated with a protective coating. 

Therefore, it is very easy to wipe it clean with a damp cloth. Never use 
any chemicals to clean the vinylon seat and armrest, as they may cause 
the latter slip or chapped. You can use a damp cloth and neutral soapy 
water to clean them, and then dry thoroughly.

Semi-annual

Monthly

Weekly

At any time

Inspection Items

Wheel hubs,driving mechanism and fasteners
Joystick function
Brake
Connecting lines
Battery condition
Tire condition
Frame condition
Motor and driver condition
Front wheel steering and other functions
Cleanliness

Summary of Contents for Ultimate W5905



















Reviews: