background image

2

4.  Use power tools only with specifically designated 

battery packs – Use of any other battery packs may 

create a risk of injury and fire.

5.  When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another – Shorting the 

battery terminals together may cause burns or a fire.

Service

1.  If your power tool requires service, contact an 

authorized Snow Joe

®

 + Sun Joe

®

 dealer or call the 

Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) – Only identical 

replacement parts should be utilized for repairs. This will 

ensure that the safety of the power tool is maintained.

2.  If the battery charger cable is damaged, it must be 

immediately replaced to avoid a hazard – Contact 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Rules for Cordless 

Drill/Driver

1.  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring – Cutting accessory 

contacting a “live” wire may make exposed metal parts 

of the power tool “live” and could give the operator an 

electric shock.

2.  Know your power tool. Read operator’s manual 

carefully. Learn its applications and limitations, as well 

as the specific potential hazards related to this power 

tool – Following this rule will reduce the risk of electric 

shock, fire, or serious injury.

3.  Make sure approved eye protection is being worn 

and properly adjusted and secured at all times the 

drill/driver is being used –

 There is a possibility that 

small pieces of metal could shear off from over-tightened 

screws while using the tool.

4.  Protect your lungs. Wear a face or dust mask if the 

operation is dusty – Following this rule will reduce the 

risk of serious personal injury.

5.  Protect your hearing. Wear hearing protection during 

extended periods of operation – Following this rule will 

reduce the risk of serious personal injury.

6.  Battery tools do not have to be plugged into an 

electrical outlet; therefore, they are always in 

operating condition. Be aware of possible hazards 

when not using your battery tool or when changing 

accessories – Following this rule will reduce the risk of 

electric shock, fire, or serious personal injury.

7.  Do not place battery tools or their batteries near fire or 

heat – 

This will reduce the risk of explosion and possibly 

injury.

8.  Do not crush, drop or damage battery pack. Do not 

use a battery pack or charger that has been dropped 

or received a sharp blow – A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 

battery immediately.

9.  Batteries can explode in the presence of a source 

of ignition, such as a pilot light –

 To reduce the risk of 

serious personal injury, never use any cordless product 

in the presence of open flame. An exploded battery can 

propel debris and chemicals. If exposed, flush with water 

immediately.

10. Do not charge battery tool in a damp or wet location – 

Following this rule will reduce the risk of electric shock.

B Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.

Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.
IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 Use only approved replacement batteries; 

other batteries may damage the cordless drill/driver and cause 

it to malfunction, which can lead to serious personal injury.

m

CAUTION!

 To reduce the risk of injury, charge the 

 

Sun Joe

®

 24V lithium-ion battery pack only in its designated 

Sun Joe

®

 lithium-ion quick charger. Other types of chargers 

present risk of fire, personal injury and damage. Do not wire 

a battery pack to a power supply plug or car cigarette lighter. 

Such misuse will permanently disable or damage the battery 

pack.

• 

Avoid dangerous environments – Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

• 

Charge in a well-ventilated area – Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

  NOTE:

 The safe temperature range for the battery is 41°F – 

105ºF (5°C – 40.5°C). Do not charge the battery outside in 

freezing weather; charge it at room temperature.

Summary of Contents for 24V-DD-LTE

















Reviews: