sunjoe 24V-DD-LTE Operator'S Manual Download Page 5

Page: 5 / 16

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S

MANUAL(S) –

Read, understand,

and follow all instructions in the

user manual(s) before attempting

to assemble and operate.

SAFETY ALERT – Indicates a

precaution, a warning, or a danger.

WEAR EYE PROTECTION –

For protection against injury, wear

safety goggles.

WARNING! Do not expose the unit

to rain or wet conditions. Keep dry.

Symbols

Descriptions

DISPOSAL – Waste produced by electrical machine items should not be

handled like normal household rubbish. Please recycle where recycle facilities

exist. Check with your local authority or retailer for recycling advice.

Indoor use only. Only use

battery charger indoors.

WET CONDITIONS ALERT –

Do not expose to rain or use in

damp locations.

Summary of Contents for 24V-DD-LTE

















Search results

Summary of Contents for 24V-DD-LTE

Reviews:

Related manuals for 24V-DD-LTE

Brands by name

Popular brands

sunjoe 24V-DD-LTE, Operator'S Manual

Search results

Summary of Contents for 24V-DD-LTE

Reviews:

Related manuals for 24V-DD-LTE

Brands by name

Popular brands