background image

14

Optional Accessories

m

WARNING!

 ALWAYS use only authorized Snow Joe

®

 + Sun Joe

®

 replacement parts and accessories. NEVER use 

replacement parts or accessories that are not intended for use with this cordless drill/driver. Contact Snow Joe

®

 + Sun Joe

®

 if you 

are unsure whether it is safe to use a particular replacement part or accessory with your cordless drill/driver. The use of any other 

attachment or accessory can be dangerous and could cause injury or mechanical damage.

NOTE: Accessories are subject to change without any obligation on the part of Snow Joe

®

 + Sun Joe

®

 to provide notice of such 

changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe

®

 + Sun Joe

®

 customer 

service center at 1-866-SNOWJOE (1-866-766-9563).

24V iON+ 2.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:
iCHRG24-AC: 1 hr 20 min  

iCHRG24-QC: 55 min
Battery Runtime Max: 1 hr 20 min

24V iON+ 2.5 Ah Lithium-Ion Battery 

Battery Charge Time Max:

iCHRG24-AC: 1 hr 40 min  

iCHRG24-QC: 1 hr 10 min 
Battery Runtime Max: 1 hr 40 min

24V iON+ 4.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:

iCHRG24-AC: 2 hrs 40 min  

iCHRG24-QC: 1 hr 50 min 
Battery Runtime Max: 2 hrs 40 min

24V iON+ 5.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:

iCHRG24-AC: 3 hrs 20 min 

iCHRG24-QC: 2 hrs 20 min
Battery Runtime Max: 3 hr 20 min

24V iON+ Lithium-Ion Battery Quick Charger 

 24V iON+ Lithium-Ion Battery Charger 

24VBAT-LTE

iCHRG24-QC

iCHRG24-AC

24VBAT-LT

24VBAT

24VBAT-XR

Model

Accessories

Item

1

2

3

4

5

6

Summary of Contents for 24V-DD-LTE

















Reviews: