User Manual
5 Installing Inverter onto Wall
21
5.2 Moving Inverter to Installation Site
If the inverter is to be installed, remove the unit from the packaging and move it
to the chosen installation site. During the moving process, the following
instructions should be obeyed.
Always remember the weight of the inverters.
Grasp the equipment handles by both hands by means of handles.
Move the unit with the help of others or the lifting device.
Do not release the equipment unless it has been secured to the wall firmly.
5.3 Installing the Inverter
Inverter is installed onto the wall by means of backplate enclosed in the
packaging. If you don’t use the supplied backplate, you may drill holes refer to
its dimension below.
Fig. 5-1
Dimensions of Backplate(unit: mm)
There are two sets of stainless fasteners supplied for attaching the backplate to
concrete wall and metal frame.
Fig. 5-2
Dimensions of Expansion Bolt Set for Concrete Wall (unit: mm)
Fig. 5-3
Dimensions of Fastener Set for Metal Frame(unit: mm)
5.3.1 Installing on Concrete Wall
Step 1
Remove backplate and fasteners from the packaging.
Step 2
Place the backplate onto the chosen concrete wall and adjust it until it is
in a horizontal position.
Step 3
Mark the positions to drill holes using the backplate as the template.
Step 4
Drill holes according to the marks made before.
