User Manual
21
4.4.2 Hoisting Transport
Step 1
Release the sealing screws on the mounting ears and store them
properly.
Step 2
Anchor two M12 thread lifting rings to the hangers of the inverter.
Step 3
Lead the sling through the two lifting rings and fasten the tie-down strap.
Step 4
Hoist the inverter, and stop to check for safety when the inverter is
100mm above the ground. Continue hoisting the device to the
destination after ensuring the safety.
Step 5
Remove the lifting rings and reassemble the sealing screws released in
Step 1.
Keep the inverter balanced throughout the hoisting process and avoid
collisions with walls or other objects.
Stop hoisting in the event of severe weather, such as heavy rain, thick fog,
or strong wind.
