19
4.4
Moving the Inverter
To install the inverter, remove the inverter from the packaging and move it to the
installation site. Follow the instructions below as you move the inverter:
•
Always be aware of the weight of the inverter.
•
Lift the inverter by grasping the handles on both sides of the inverter.
•
Move the inverter by at least two persons or by using proper transport tool.
•
Do not release the equipment unless it has been secured firmly.
4.5
Installing the Inverter
Inverter is mounted onto the wall via the wall-mounting bracket enclosed in the packing.
If you do not use the supplied wall-mounting bracket, you can drill holes as per
specifications below:
ffiig
gu
urre
e 4
4--1
1 Dimensions of the wall-mounting bracket (figures in mm)
step 1
Take out the wall-mounting bracket and corresponding fasteners from the packaging.
step 2
Place the wall-mounting bracket on the chosen concrete wall and adjust it to proper
position and height.
step 3
Mark positions according to holes on the wall-mounting bracket, and drill holes
according to the marks made before.
User Manual
