Sungrow Logger1000, User Manual

Page: 58 / 94

48
• Users in Australia select Australian Server .
• Users in other regions select the International Server .
The remote maintenance address will change once the Logger1000 is restart.
step 3 Click Save to enter the Remote Access interface.
step 4 Enter the login password and click Confirm .
step 5 Access information is saved in the following two ways.
• Click Copy remote access information , and save the access information locally after
successful copying.
• Enter the email address and click Send to send the access information to the email
address.
step 6 Enter the access link in the URL field to enter the Remote Maintenance interface. Enter the
device S/N and password, and click Login to perform remote maintenance.
- - End
7.10.4 Message Export
step 1 Click System→Message Export to enter the corresponding interface.
table 7-4 Parameter description
Parameter
Description Range
Port -
Serial port: COM1 、 COM2 、 COM3
Network port: ETH, WiFi, 4G
Duration
Export the message
recorded during the set time
1min ~ 10min
step 2 Set parameters, including Interface , Serial Port , and Duration , and click Start to start
recording message. The recording automatically stops when the set time reaches, or the
user may manually click the button
Stop to stop recoding message.
step 3 Click Export to export the message.
7 WEB Interface User Manual