13
Assembly
4.1
Upper Plate + Riband
4.2
Upper Plate + Battery Holder
1.
Place the battery holder on the upper
plate.
Note:
Leave the holder’s wires in
the tail direction.
2.
Fasten the battery holder with two M3*8
screws and two M3 nuts. It should be
shown as below after it's done.
1.
Cut the 30cm ribbon into halves. Thread the ribbon through the acrylic plate. Leave
the riband with one end longer on one side of the plate (onto which to fix the battery
holder). Thread the other half through the upper plate in the similar way.
SunFounder