eGPS Solutions Trimble 5600 Quick Start Manual Download

Page: 1 / 3

Trimble 5600

Bluetooth Dongle

eGPS Solutions

(770) 695-3361 | www.eGPS.net

Page

Step

Action

Display

The purpose of this guide is to show the basics of replacing the Trimble radios used with the Trimble 5600/

TDS Ranger Robotic instrument configuration with two Parani Bluetooth Dongles, one for the Robot and

one for the Data Collector.

The same setup should work with any Data collector that has a serial port and no long range Bluetooth. If

the client has a long range Bluetooth data collector then the second Parani long range Bluetooth adapter

would not be needed.

Below is a list of the items used:

Contact eGPS to purchase TWO of each of the following:

Parani-SD1000 Bluetooth Serial Adapter

Dipole Antenna - RP-SMA Right-Hand Thread, 5dBi

Extended Battery pack for Parani-SD1000

External Power Adapter - Includes one of four regional power plugs

DB9 Female to Male Gender

5600 Geodimeter to Data Collector Cable w/ Power Clips

Summary of Contents for Trimble 5600

Page 1: ...k with any Data collector that has a serial port and no long range Bluetooth If the client has a long range Bluetooth data collector then the second Parani long range Bluetooth adapter would not be ne...

Page 2: ...nds Keep the power ON d Press the Pairing Button of SD2 for 2 seconds until Mode LED blinks 3 times every 3 seconds Now press again the Pairing Button for 2 seconds until Mode LED blinks every second...

Page 3: ...ata Collector and plug in the Bluetooth Dongle the Dongle should be Off to the serial port that the collector was plugged in to You will need to use the Null modem gender changer included with the Blu...