Bi-spectrum network camera
User Manual
Product Overview
Issue V 1.1
(
2022-05-07
)
9
marks on the sticker. Drive the swell plastic buttons into holes.
Step 2
Loosen screw 1 to free the body to easy to install the fixed screws of camera. This
step before mount is highly suggested to make it convenient to use electric
screwdriver, as shown in Figure 1-2.
Figure 1-2
Adjust direction
Screw 1
Step 3
Install the camera on the ceiling or wall and fixe the screws as shown in Figure 1-3.
Figure 1-3
Fix camera
Step 4
Connect the multi-connector cable and monitor, loosen the screw 2 to adjust the
position so that the camera face the monitored area, as shown in Figure 1-4. Tighten