| 24
Then remove the crank from hole
6
and put into hole
5
and turn anticlockwise
direction to move the sliding pole downwards till the block point on sliding tube
hits the slider.
Remove the crank handle out of hole
5
and place it on crank holder for future
use, and use the attache string to tie the umbrella top to the frame.
The umbrella should be protected against blur-
ring or damage by pulling on the protective cover
when not in use. Put the cover over umbrella top
with stick and pull downwards to close the cover
with zipper.
CAUTION:
Not to put protective cover on immedi-
ately when the canopy is not dry enough.
CAUTION:
Please close your umbrella when there is strong wind, or do not use under bad
weather condition to ensure you long time enjoyment of our umbrella.
