23 |
4.3 360 degree rotating umbrella
CAUTION:
It’s better do the rotating when the umbrella is
closed, if not, follow the below steps 4.4 to close the umbrella
first and then do the rotating.
Method 1: Loosen the union nut
K
by turning anticlockwise,
lift the fixation ring
M
, rotate the umbrella to the desired loca-
tion. And put down the part
M
again, tighten the union nut
K
securely.
Method 2: Loosen the union nut
K
by turning anticlockwise,
lift up umbrella pole from base, turning the umbrella to the de-
sired angle and put it back into the base, then tighten the union
nut securely like method 1.
4.4 Closing the umbrella
Put crank into hole
5
to turn crank clockwise direction to move the sliding tube out to max. Top till it hits stop-
per.
CAUTION:
Before closing the umbrella, always
make sure the sliding tube is out at its max. top,
and whole umbrella top remains horizontal.
And then we could start to close the
umbrella by put the crank into hole
6
,
and turn the crank anticlockwise to
close the umbrella completely.
