15
12 hour setting
Ideal for colder nights or those who like
warmth all through the night, the 12 hour
setting automatically switches your electric
blanket off after 12 hours. Move the
slide switch to the 12 hour position. The
temperature dial will then illuminate enabling
you to turn the dial to your desired heat
setting. The timer indicator light (positioned
next to the side switch) will go out, indicating
that the blanket is on and heating. Sunbeam
recommends that you use only settings 1, 2
or 3 for all night use.
Your electric blanket will automatically
switch off after 12 hours. At the end of the
timer period, the timer indicator light will
illuminate and the light in the temperature
dial will go out, indicating that the timer
period has elapsed and the blanket is no
longer heating.
To restart the timer, move the slide switch
to the OFF position and then return it to the
desired timer position.
Using your 6 heat digital timer control
Ensure that the control is connected to the
blanket properly. Move the slide switch on
the rear of the control to the on position (I).
The blue standby light (
)
will illuminate to
indicate that the blanket is connected to the
power outlet but is not heating.
Press the timer button (
) to turn the
control on. Heat setting 1 will illuminate.
Select the desired temperature using the
temperature (
) button. The selected
temperature setting will illuminate. Pressing
the temperature button cycles through the
various temperature settings, from 1 through
to 6, then back to 1.
Sunbeam recommends that you use only
settings 1-5 for all night use. Use setting 6
for fast preheating only.
To change the timer period, press the timer
button (
). Pressing the timer button will
cycle through the two timer options, 1 hour
or 9 hours, and standby mode. If the timer
setting is changed during the timer period,
the timer will restart.
At the end of the selected timer period, the
blanket will switch off and the blue standby
light will illuminate. To switch the blanket
on again, press the timer button to select a
timer period. The control will default to the
previous temperature setting. You can adjust
the temperature at any time during the timer
period.
Using your electric blanket (continued)
Figure 7.