7
AIR CONDITIONER FEATURES (con’t)
SLEEP FEATURE
Press SLEEP.
In this mode, the selected temperature will increase by 2°F 30 minutes after the mode is selected. The
temperature will then increase by another 2°F after an additional 30 minutes. This new temperature
will be maintained for 7 hours before it returns to the originally selected temperature. This ends the
sleep mode and the unit will continue to operate as originally programmed. The sleep mode can be
cancelled at any time during operation by pressing the SLEEP button again.
CHECK FILTER FUNCTION
This feature is a reminder to clean the air
fi
lter. The LED will illuminate after 250 hours of operation.
To reset after cleaning the
fi
lter, press the CHECK FILTER button and the light will turn off.
CLEAN AIR FEATURE (on some models)
Press CLEAN AIR.
When this feature is on, the electronic air puri
fi
er is energized to remove pollen and impurities from
the air. To cancel this feature, press CLEAN AIR (the light will turn off). Note this function cannot be
activated from the remote control.
AIR DIRECTIONAL LOUVERS (Auger Type)
Air directional louvers control air
fl
ow direction. The louvers will allow you to direct the air
fl
ow up,
down, left, or right, throughout the room as needed. Rotate the Auger Wheels until the desired Left/
Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained.
FRESH AIR VENT CONTROL (on some models)
The Fresh Air Vent Control allows the air conditioner to recirculate the inside air, draw fresh air into
the room, and exchange air from the room and draw fresh air into the room.
Note:
Please always wait three minutes when turning the air conditioner off then on again and when
changing from cool to fan and back to cool. This prevents the compressor from overheating and
possible circuit breaker tripping.
