6
AIR CONDITIONER FEATURES (con’t)
TO USE AUTO TEMP FEATURE
Press AUTO TEMP.
The fan defaults to high speed and adjusts to slower speeds as the room temperature cools. The fan
speeds will readjust back to the slowest speed as the room returns to the original temperature. Press
either the FAN SLOWER or FAN FASTER button to manually adjust the fan speed.
TO OPERATE ON FAN ONLY
Press MODE.
Select FAN ONLY.
Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale
air. (Remember to open the vent during this function, but keep it closed during cooling for maximum
cooling ef
fi
ciency.) You can choose any fan speed you prefer. During this function, the display will
show the actual room temperature, not the set temperature as in cooling mode.
TO USE THE ENERGY SAVER FUNCTION
Press MODE.
Select ENERGY SAVER.
In this mode, the fan will continue to run for 3 minutes after the compressor is shut off. The fan then
cycles on for 2 minutes in 10-minute intervals until the room temperature is above the set temperature.
The compressor will then turn back on and starts cooling.
TIMER: DELAY START/STOP
Press TIMER.
To adjust the timer setting, tap or hold the up and down arrows (
▲▼
) to change the delay timer setting
in half-hour increments, up to 10 hours, then in hour increments up to 24 hours. The control will
count down the time remaining until start. The delay start mode automatically selects cooling with
maximum fan speed. The temperature maintained will be the same as previously set. To change the
set temperature, press COOL, then the up or down arrows until the desired temperature is indicated
on the display. After 5 seconds, the control will automatically change the display back to the hours
remaining until the unit will start/stop. Turn the unit on or off at any time will cancel the delay start/
stop function. For delay stop, the unit must be in the ON position. For delay start, the unit must be in
the OFF position.
