Thermostat knob
Mode knob
When using FAN control, turn slowly allowing unit
to adjust.
When using
THERMOSTAT
, be sure to allow three
minutes before changing temperature. Adjusting
too quickly may cause an overload resulting in a
blown fuse.
CAUTION
!
!
MODE
Fig.9
The mode knob controls fan speeds and cooling
speeds. To set desired cooling temperature, simply
rotate the mode knob dial to the appropriate
setting. See Fig. 9.
LOW FAN
will circulate the air at a minimum speed
without cooling.
HIGH FAN
will circulate the air at a maximum speed
without cooling.
LOW COOL
provides cooling, automatically with
minimum air circulation. Recommended for night-
time use.
HIGH COOL
provides cooling, automatically with
quick cooling or for extremely hot days. Once room
is cooled, reduce setting to
LOW COOL
.
NOTE:
After setting the mode, allow 3
minutes before switching to another mode.
OFF
will completely shut-off the unit.
THERMOSTAT
The thermostat automatically controls the cooling
cycle (compressor) of the air conditioner to maintain
room temperature. However, the fan motor will
continue to operate after the compressor (cooling
cycle) is completed. See Fig.9.
Operating Instructions
9
Mechanical control model
Fig.10
Fresh Air
Vent Lever
Fresh Air Ventilation
is usually kept in the closed
position. Use only when clearing smoke and/or
odors from the room. Pull to open. (See Fig.10).
