3
2
Features of your Quantum
®
Plus
Kettle
Before using your kettle.
We recommend that you clean your kettle
before use. Fill the kettle with water up to the
maximum level indicator; boil then pour out.
Using your kettle.
1. To fill the kettle, remove it from the power
base and open the lid. Alternatively fill the
kettle through the pouring spout.
2. Fill the kettle with the desired amount of
water. Always fill the kettle between the
minimum and maximum marks. Too little
water will result in the kettle switching off
before the water has boiled.
NOTE:
Do not fill the kettle over the maximum
level, as water may spill out of the spout
when boiling.
3. Push the lid closed firmly until it locks into
position.
4. Place the kettle on the power base and
connect the plug into a power outlet. Turn
the power ON.
5. Press the ON/OFF button downwards at the
base of the kettle.
NOTE:
Ensure that the ON/OFF switch is clear
of obstructions and the lid is firmly closed.
The kettle will not turn off if the ON/OFF
switch is constrained. Do not remove the kettle
from the power base while water is heating.
6. Lift the kettle from the power base and
pour the water.
NOTE:
Use caution when pouring the water
from your kettle, as boiling water will scald.
7. The kettle may be stored on the power
base while not in use. The kettle will not
re-boil until the ON/OFF switch is pressed
downward.
NOTE:
Ensure the power is turned off at the
power outlet when the kettle is not in use.
Should you accidentally allow the kettle to
operate without water, boil-dry protection will
automatically switch it off. If this occurs,
allow the kettle to cool before filling with
cold water and re-boiling.
Using your Kettle
Safety is a major consideration in the
design of a Sunbeam kettle. This is why we
have developed our 3-Way Safety System,
which ensures that your kettle will:
1. Automatically switch off after boiling.
For convenience, safety and energy
efficiency, your Sunbeam kettle will
automatically switch off after boiling.
2. Cut-out for boil-dry protection.
If the kettle is operated without water, it
will automatically cut-out, preventing any
damage to the element.
If this occurs, allow the kettle to cool
before filling with cold water and
re-boiling.
3. Shut-down in case of overheating.
In the event of overheating, the kettle will
automatically shut down to prevent further
damage.
Sunbeam’s 3-Way
Safety System
1. Filter
2. Spout
3. Lid
4. On/off switch
1
2
3
4
