13
Advanced Programming
In standby mode press
"PROGRAM" button
and get in to the
program mode.
(sequence:
showerhead outlet
water temperature,
steam flow rate, hot
water temperature,
pre-infusion, cleaning limit).
Keep pressing "PROGRAM" to choose the
desired program setting.
1. Showerhead outlet water temperature:
adjust the coffee thermoblock temperature
(range: 86 / 87 / 88 / 89 / 90 / 91 / 92
/ 93 / 94 / 95 / 96 / 97 / 98); press "-"
or "+" to change the setting and press
"PROGRAM" to save.
2. Steam flow rate:
adjust the steam
flow rate (range:
01-07, 01 is the
smallest and 07
is the biggest
setting); press "-" or
"+" to change the
setting and press
"PROGRAM" to save.
3. Pre-infusion
rate: adjust the
pre-infusion rate
(range: P1-P4);
press "-" or "+"
to change the
setting and press
"PROGRAM" to save.
4. Cleaning reminder:
set the water usage
limit for cleaning
reminder (range:
50L / 100L /
180L); press "-" or
"+" to change the
setting and press
"PROGRAM" to save.
5. Reset: reset all
setting back to
factory setting;
press "-" or "+"
to reset.
1 cup volume:
Adjust
the 1 cup volume (LCD will display the time
counting, but the volume will be determined
by flow meter); press and hold "1 cup" button
for 3 seconds then the machine will start
brewing, when the coffee volume is enough,
press again "1 cup" button to save.
2 cup volume:
Adjust the 1 cup volume
(LCD will display the time counting, but the
volume will be determined by flow meter);
press and hold "2 cup" button for 3 seconds
then the machine will start brewing, when
the coffee volume is enough, press again
"2 cup" button to save.
Figure 27
Figure 28
Figure 29
Figure 30
Figure 31
Figure 32