background image

1

Sunbeam’s Safety Precautions

  Sunbeam is very safety conscious when designing 

and manufacturing consumer products, but it is 
essential that the product user also exercise care 
when using an electrical appliance. Listed below 
are precautions which are essential for the safe use 
of an electrical appliance:

•  Read carefully and save all the instructions 

provided with an appliance.

•  Always turn the power off at the power outlet 

before you insert or remove a plug. Remove by 
grasping the plug - do not pull on the cord.

•  Turn the power off and remove the plug when the 

appliance is not in use and before cleaning.

•  Do not use your appliance with an extension cord 

unless this cord has been checked and tested by 
a qualified technician or service person.

•  Always use your appliance from a power outlet of 

the voltage (A.C. only) marked on the appliance.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, 
sensory or mental capabilities, or lack of 
experience and knowledge, unless they have been 
given supervision or instruction concerning use 
of the appliance by a person responsible for their 
safety. 

•  Children should be supervised to ensure that they 

do not play with the appliance.

•  The temperature of accessible surfaces may be 

high when the appliance is operating.

•  Never leave an appliance unattended while in 

use.

•  Do not use an appliance for any purpose  

other than its intended use.

•  Do not place an appliance on or near a hot gas 

flame, electric element or on a heated oven. 

•  Do not place on top of any other appliance.
•  Do not let the power cord of an appliance hang 

over the edge of a table or bench top or touch 
any hot surface.

•  Do not operate any electrical appliance with a 

damaged cord or after the appliance has been 
damaged in any manner. If damage is suspected, 
return the appliance to the nearest Sunbeam 
Appointed Service Centre for examination, repair 
or adjustment. 

•  For additional protection, Sunbeam recommend 

the use of a residual current device (RCD)
with a tripping current not exceeding 30mA in 
the electrical circuit supplying power to your 
appliances.

•  Do not immerse the appliance in water or any 

other liquid unless recommended.

•  Appliances are not intended to be operated by 

means of an external timer or separate remote 
control system.

•  This appliance is intended to be used in 

household and similar applications such as: staff 
kitchen areas in shops, offices and other working 
environments; farm houses; by clients in hotels, 
motels and other residential type environments; 
bed and breakfast type environments.

  SAFETY PRECAUTIONS FOR YOUR IRON
•  Do not leave a hot iron within reach of 

children. If they come into contact with a hot 
iron it could lead to serious burns.

•  Iron only on an ironing board. Do not place the 

steam generator on carpet during use.

•  The steam generator must not be stored whilst 

it is connected to the supply. The electronic 
switch provided is for functional use only 
during operation, and is not intended to 
provide disconnection from the supply.  
Before storing the iron after use, it must be 
unplugged from the supply.

•  The steam generator takes approximately 2 

hours to completely cool down. Allow the steam 
generator to cool completely before storing.

•  Do not wind the cord around the soleplate 

while the iron is still hot.

•  Do not leave the steam generator unattended 

while it is plugged into the power outlet.

•  The steam generator must be used and rested 

on a stable surface. When placing the steam 
generator on a stand, ensure that the surface 
on which the stand is placed is stable.

•  The steam generator is not to be used if it has 

been dropped, if there are visible signs of  
damage or if it is leaking.

•  This steam generator features an “auto-off” 

function, which is an additional safety feature 
designed to disconnect power to the heating 
element if the steam generator has not been 
used for a certain period of time.

  If you have any concerns regarding the performance and use of your appliance,  

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

  Ensure the above safety precautions are understood.

Summary of Contents for Pro Glide SR8710





















Reviews: