background image

12 Month Replacement Guarantee

In the unlikely event that this appliance develops any malfunction 
within 12 months of purchase (3 months commercial use) due  
to faulty materials or manufacture, we will replace it for you free  
of charge.

Should you experience any difficulties with 
your appliance, please phone our customer 
service line for advice on 1300 881 861 in 
Australia, or 0800 786 232 in New Zealand. 
Alternatively, you can send a written claim  
to Sunbeam at the address listed below.  
On receipt of your claim, Sunbeam will 
seek to resolve your difficulties or, if the 
appliance is defective, advise you on how  
to obtain a replacement or refund.

Your Sunbeam 12 Month Replacement 
Guarantee naturally does not cover misuse  
or negligent handling and normal wear and 
tear.

Similarly your 12 Month Replacement 
Guarantee does not cover freight or any other 
costs incurred in making a claim. Please 
retain your receipt as proof of purchase.

The benefits given to you by this guarantee 
are in addition to your other rights and 
remedies under any laws which relate to the 
appliance.

Our goods come with guarantees that cannot 
be excluded under the Australian Consumer 
Law and under the New Zealand Consumer 
Guarantees Act. 

In Australia you are entitled to a 
replacement or refund for a major failure and 
for compensation for any other reasonably 
foreseeable loss or damage. You are also 
entitled to have the goods repaired or 
replaced if the goods fail to be of acceptable 
quality and the failure does not amount to  
a major failure. 

Should your appliance require repair or 
service after the guarantee period, contact 
your nearest Sunbeam service centre.

For a complete list of Sunbeam’s authorised 
service centres visit our website or call:

Australia 
www.sunbeam.com.au

1300 881 861

Units 5 & 6, 13 Lord Street 

Botany NSW 2019 Australia 

New Zealand 
www.sunbeam.co.nz

0800 786 232

26 Vestey Drive, Mt Wellington  

Auckland, New Zealand

 

Summary of Contents for LC9600Z



















Reviews: